In nearly all situations, most individuals spend quite a lot of money purchasing their lift truck. Therefore, it is extremely important to take good care of it in order to protect your investment well into the long run. It is a great idea to know the procedures which are undertaken during the care and maintenance of this piece of machinery.
Amongst the best ways to tell how good the engine is running is by starting the lift truck up and listening closely to see how it runs. Like for example, if there are any knocks or misses, the machine is defective and this must raise several issues. In addition listen closely for any squealing sounds that come from the belts since these noises will provide you with a lot of information.
Several of the main components requiring attention during maintenance consist of the safety warning devices, gauges, horn, the lights and the overhead guard. Any faulty components or burnt out light bulbs have to be replaced as soon as they are noticed. It is also vital to inspect the wiring.
When the above parts have been inspected thoroughly, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each and every battery cell needs to be inspected so as to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the equipment and then change the filters. The transmission filter, fuel filters and the hydraulic filter should be frequently replaced. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
After the oil change is finished and the filters have been replaced, a visual inspection of the drive axle has to be carried out. If there is a grease fitting on the axle make certain to apply some grease. Check the engine belts for any frays or cracks. If you find any, fix the issue accordingly. Next, check every other part of the machinery like the wheels. If any type of fault or concern is detected, be sure to address it immediately so as to make certain the machinery is working at its safest and optimum levels.